SECTIONS FOR IMPLANTS

Made of high-quality stainless steel and titanium EZM manufactures sections for implant material such as screws, nails and bone plates.

 

 

EZM Chiruline

Under the EZM Chiruline brand name EZM manufactures stainless steel products EZM Chirusteel as well as titanium alloys EZM Chirutan.

 

DeutschEnglish
  

STAINLESS HIGH-GRADE STEELS AND TITANIUM ALLOYS / EZM CHIRULINE 

 

 

EZM Edelstahlzieherei Mark is traditionally a manufacturer of speciality products, whose uses also include medical equipment.

 

To do justice to the high, specific demands on this product segment and this market, we have given these products a special status within the company. EZM offers EZM Chirusteel and EZM Chirutan products under the brand family name EZM Chiruline.

 

In addition to placing special orders, customers can also fall back on medical grades and versions kept in stock.

 

EZM Edelstahlzieherei Mark offers its customers in the medical equipment sector an extensive range of materials and versions – from stainless materials to titanium, and from ground round bars to sections.

 

 

Drill wiresBohrdrähte_Rostfreie Edelstähle und Titanlegierungen   Implants/Bone platesImplante/Knochenplatten_Rostfreie Edelstähle und Titanlegierungen   Implants/ScrewsImplantate/Schrauben_Rostfreie Edelstähle und Titanlegierungen   Titanium implantsTitannagel.png

 

 

             
             

>> Current alloy surcharges

 

           

>> Current scrap

surcharges

           

 

VERSIONS AND FORMS SUPPLIED

 

Drawing

  • From 2.0 mm to 28.0 mm round, tolerance zone IT 9
  • Min. bar length 2,000 mm
  • Max. bar length 5,000 mm (2.0 mm to 6.0 mm round
  • Max. bar length 7,000 mm (6.0 mm to 16.0 mm round)
  • Max. bar length 9,000 mm (> 16.0 mm round and on request)
  • Length tolerance ± 25.0 mm
  Grinding

  • From 0.5 mm to 32.0 mm round, tolerance zone IT 6 (Rm up to 1,600 N/mm² for bright steel for standard parts)
  • > 32.0 mm to 60.0 mm round, tolerance zone IT 8
  • Min. bar length 1,500 mm (0.5 mm to 8.0 mm round)
  • Min. bar length 2,000 mm (> 8.0 mm to 32.0 mm round)
  • Max. bar length 6,000 mm (> 32.0 mm round)
  • Max. bar length 12,000 mm (> 10.0 mm < 25.0 mm and on request)
 

Sections, cold drawn

 

Symmetrical Sections

  • Squares
  • Hexagons
  • Octagons
  • Special sections to customer drawings from 0.5 mm² to 8,000 mm² cross-section

Chamfering/Pointing

 

  • Diameter range 7.0 mm to 30.0 mm round (≤ 7.0 mm round on request)
  • Max. bar length 7,000 mm
  • 30° angle, alternatively 45°
  • End facing
  • Pointing, 0.7 mm x diameter
 

Wire grinding

 

  • Starting diameter 6.5 mm to 21.0 mm round
  • Finished diameter 6.0 mm to 20.0 mm
 

Non-destructive crack testing

 

  • 7.0 mm to 30.0 mm round
  • ≥ 30.0 mm round on request
Ultrasonic testing

  • 15.0 mm to 30.0 mm round
  • > 30.0 mm round on request
 

Short length

 

  • Min. piece length 300.0 mm
  • Diameter range 10.0 mm to 30.0 mm
  • Flat 8.0 mm to 60.0 mm wide, 6.0 mm to 15.0 mm high
  • Length tolerance 0.3 mm
 

Adiabatic cutting

 

  • High-speed cutting of sections and round stock
  • Cross-sections: 5.0 mm² to 2,000

Packaging

 

  • Bars: loose/in bundles/in crates
  • Coils: loosely wound/spooled/special packaging
       

 

 

 

To provide you with the best possible service, we use cookies on our website. By visiting and using our website you agree to the use of cookies. Get more information in our Privacy Policy.

Privacy Policy